What Is A Registered Agent For State Charity Registrations
1.one. What is Cisco Smart Licensing?
Cisco Smart Licensing is a cloud-based unified license management system that manages all of the software licenses across Cisco products. It enables customers to purchase, deploy, manage, track and renew Cisco Software licenses. It also provides information nearly license ownership and consumption through a single user interface
The solution is comprised of online Smart Accounts (at Cisco Smart Licensing Portal) used for tracking Cisco software assets and the Cisco Smart Software Director (CSSM) which is used to manage the Smart Accounts. CSSM is where all licensing management related tasks, such as registering, de-registering, moving, and transferring licenses can be performed. Users can be added and given access and permissions to the smart account and specific virtual accounts.
ane.2. Smart Licensing Implementation Methods
There are multiple methods in deploying Cisco Smart Licensing that can be leveraged depending on a visitor's security profile such equally:
Direct Cloud Access
Cisco products send usage information directly over the Internet securely using HTTPS. No additional components are needed.
Admission through an HTTPS Proxy
Cisco products send usage information through an HTTP proxy server securely using HTTPS. An existing proxy server tin be used or this can exist deployed through Cisco'southward Ship Gateway.
On-premise License Server (Cisco Smart Software Managing director satellite)
Cisco products send usage information to an on-premise server instead of directly over the internet. Once a month the server reaches out over the net for all devices via HTTPS or tin be manually transferred to synchronize its database. CSSM Satellite is available as a Virtual Car (VM) and can be downloaded here.
1.iii. Supported IOS XE Platforms
- From 16.9.1 release onwards, the Catalyst 3650/3850 and Catalyst 9000 series switch platforms back up the Cisco Smart Licensing method as the only licensing method.
- From 16.10.1 release onwards, router platforms such as the ASR1K, ISR1K, ISR4K, and virtual routers (CSRv / ISRv) support the Cisco Smart Licensing method as the but licensing method.
1.4. Migration fromLegacy Licenses to Smart Licenses
In that location are two methods for converting a legacy license, similar Right-To-Employ (RTU) or Production Activation Central (PAK) to a Smart License. For details on which method needs to be followed please refer to the relevant release notes and/or configuration guide for the specific Cisco device.
1.4.1. Converting through Device Led Conversion (DLC)
- Device Led Conversion (DLC) is a 1-fourth dimension method where the Cisco Product can study what licenses it is using and the licenses are automatically deposited into their respective Smart Account on the Cisco Smart Software Manager (CSSM). The DLC process is performed directly from the Command Line Interface (CLI) of the specific Cisco device.
- The DLC process is but supported on the Catalyst 3650/3850 and selected router platforms. For specific router models please refer to the individual platform configuration guide and release notes. Example: DLC process for Goad 3850 running Fuji 16.9.x releases.
1.4.ii. Converting through Cisco Smart Software Manager (CSSM) or License Registration Portal (LRP)
Cisco Smart Software Manager (CSSM) Method:
1. Login to Cisco Smart Software Manager (CSSM) at https://software.cisco.com/
ii. Navigate to Smart Software Licensing > Catechumen to Smart Licensing
3. Select Convert PAK or Convert Licenses
4. Locate the license in the tabular array below if converting PAK license. If converting a non-PAK license use the"License Conversion Wizard" for footstep by step directions.
Location of known PAK files associated with Account:
Location of "License Conversion Wizard" link:
5. Locate the Desired License and Product combination
half-dozen. Click (under Actions): Convert to Smart Licensing
7. Select desired virtual account, license, and click Next
8. Review Selections, then click Convert Licenses
one.4.three. Converting through contacting Cisco Global Licensing Operations (GLO) department
The Global Licensing Operations department can be reached here at our worldwide contact centers.
2.1. Basic configuration
Exact procedure how to configure Smart Licensing tin exist plant in Organisation Management Configuration Guide bachelor for each release / platform.
For example: System Direction Configuration Guide, Cisco IOS XE Fuji 16.9.ten (Goad 9300 Switches)
two.2. Registration Token / Device ID Token
Earlier registering device, Token needs to be generated. The registration token, also known as the device id token, is a unique token generated from the smart licensing portal or Cisco Smart Software Managing director satellite when initially registering a Cisco device to the corresponding smart business relationship. An individual token tin can be used to annals multiple Cisco devices depending on the parameters used during cosmos.
The registration token is likewise only required during initial registration of a Cisco device as it provides the information to the device to call-home to the Cisco back end and be tied to the correct Smart Business relationship. After the Cisco device is registered the token is no longer required.
2.3. Registration and License States
While deploying and configuring Smart Licensing there are multiple possible states that a Cisco device can be in. These states can exist displayed by looking attestify license all orprove license statusfrom the Command Line Interface (CLI) of the Cisco device.
Beneath is a list of all states and their pregnant:
- Evaluation (Unidentified) Land
- This is a default country of the device when first booted.
- Ordinarily, this state is seen when a Cisco device has not yet been configured for Smart Licensing or registered to a Smart Business relationship.
- In this country all features are available and the device can freely change license levels.
- The evaluation menses is used when the device is in the unidentified state. The device volition not endeavour to communicate with Cisco in this country.
- This will be ninety days of usage and not 90 agenda days. One time information technology is expired it is never reset.
- At that place is ane evaluation period for the entire device it is not per entitlement
- When the evaluation catamenia expires at the end of ninety days, the device goes in to EVAL EXPIRY mode, however at that place is no functional affect or disruption in functionality, even after reload. Currently there is no enforcement in place.
- The inaugural time is maintained across reboots.
- The evaluation menstruation is used if the device has non nevertheless registered with Cisco and has non received the following two letters from the Cisco backend:
- Successful response to a registration asking
- Successful response to an entitlement authorization request.
- Registered Country
- This is the expected state after successfully completing registration.
- The Cisco device has been able to successfully communicate with a Cisco Smart Account and register.
- The device receives an ID document valid for 1 year which will exist used for hereafter communications
- The device volition send a request to CSSM to qualify the entitlements for the licenses in utilize on the device
- Depending on the CSSM response the device will then enter Authorized or Out of Compliance
- The Id certificate expires at the stop of ane yr. After 6 months the software Agent process volition try to renew the certificate. If the Agent cannot communicate with the Cisco Smart Software Managing director information technology volition keep to endeavor and renew the Id certificate until the expiration date (ane year). At the cease of one year, the agent will go back to the United nations-Identified state and will endeavour to enable the Evaluation period. The CSSM will remove the product case from its database.
- Authorized State
- This is the expected country when device is using an entitlement and is in Compliance (no negative balance),
- The Virtual Account on CSSM had the correct type and number of licenses to authorize the consumption of the device's licenses
- At the end of 30 days, the device will send a new request to CSSM to renew the authorization.
- Has a fourth dimension span of 90 days later on which (if not successfully renewed) is moved to Authorization Expired state.
- Out of Compliance Country
- This is the state when device is using an entitlement and is not in Compliance (negative remainder),
- This state is seen when the license does not have an available license in the respective Virtual Account that the Cisco device is registered to in the Cisco Smart Account.
- To enter into Compliance / Authorized country, a client must add the right number and type of licenses to the Smart Business relationship
- When in this land the device will automatically send an authorization renewal request every day
- Licenses and features will continue to operate and there is no functional impact
- Potency Expired Country
- This is the country when device is using an entitlement has not been able to communicate with the Cisco Smart Account associated for over ninety days.
- This is typically seen if the Cisco device loses internet access or cannot connect to tools.cisco.com after initial registration.
- Online methods of smart licensing require Cisco devices to communicate a minimum of every xc days to prevent this status.
- CSSM will render all in use licenses for this device back to the puddle since it has non had whatsoever communications for ninety days
- While in this state the device will continue to try to contact Cisco, every hour, to renew the entitlement say-so, until the registration period (id certificate) expires
- If the software Agent re-establishes communications with Cisco and receives to its request for dominance information technology will procedure that respond normally and enter into ane of the established states
- Starting in 16.9.1 for switches and 16.ten.1 for routers, a default Call-dwelling profile named "CiscoTAC-1" is generated to assist with migrating to Smart Licensing. By default, this profile is set for the Directly Cloud Access method.
#bear witness phone call-dwelling house profile CiscoTAC-1 Profile Name: CiscoTAC-1 Contour status: Agile Profile mode: Total Reporting Reporting Data: Smart Call Home, Smart Licensing Preferred Bulletin Format: xml Message Size Limit: 3145728 Bytes Send Method: http HTTP accost(es): https://tools.cisco.com/its/service/oddce/services/DDCEService Other accost(es): default <snip>
- When utilizing a Cisco Smart Software Manager satellite, the destination accost under the agile call-habitation configuration must point to it (instance-sensitive!):
(config)#call-dwelling
(cfg-call-domicile)#profile "CiscoTAC-1"
(cfg-phone call-home-profile)#destination accost http https://<IP/FQDN>/TransportGateway/services/DeviceRequestHandler
- If DNS needs to be resolved in a VRF, then DNS can be configured in the following style:
(config)#ip domain-lookup [source-interface <INTERFACE>]
(config)#ip proper name-server [vrf <VRF>] <IP>
Alternatively, if DNS is non bachelor, statically configure local DNS to IP mapping (based on local DNS resolution on your finish-device) or replace DNS name in phone call-dwelling house configuration with IP address. Refer to example for directly cloud access (for Cisco Smart Software Director satellite utilise its own DNS name instead of tools.cisco.com):
(config)#ip host tools.cisco.com 173.37.145.8
- If communication totools.cisco.comneeds to be originated from the interface in specific VRF (e.thousand. Mgmt-vrf), and so the following CLI needs to be configured:
(config)#ip http client source-interface <VRF_INTERFACE>
- A dissimilar number of licenses might exist consumed depending on the configuration of the Cisco device such as with Catalyst switches running in StackWise or StackWise Virtual:
Traditional Stack-wise Supported Switches (e.k. Catalyst 9300 serial):
Network License: 1 license is consumed per switch in the stack
Deoxyribonucleic acid License: 1 license is consumed per switch in the stack
Modular Chassis (e.yard. Catalyst 9400 series):
Network License: 1 license is consumed per supervisor in the chassis
Dna License: 1 license is consumed per chassis
Fixed Stack-wise Virtual Supported Switches (eastward.g. Catalyst 9500 series):
Network License: 1 license is consumed per switch in the stack
DNA License: 1 license is consumed per switch in the stack
- Simply ane call-home profile tin exist agile for Smart Licensing.
- Licenses are only consumed if a respective feature is configured.
- Cisco devices configured for Smart Licensing need to exist configured with the correct system time and date to ensure they are properly synchronized with the corresponding Cisco Smart Account. If the fourth dimension offset of the Cisco device is likewise far off it, the device can fail to register. The clock will demand to be manually set or configured via a timing protocol such as Network Fourth dimension Protocol (NTP) or Precision Time Protocol (PTP). For the exact steps required to implement these changes please refer to the configuration guide for the specific Cisco device.
- The Public Key Infrastructure (PKI) key generated during the Cisco device registration needs to be saved if it is not automatically saved after registration. If the device fails to save the PKI key then a syslog is generated stating to save the configuration via "copy running-config startup-config" or "write memory".
- If the PKI primal of the Cisco device is non properly saved, then the license country can be lost on failovers or reloads.
- Smart Licensing does not support HTTPS Proxy SSL certificate interception by default when using tertiary party proxies for the HTTPS Proxy method. To back up this feature, you tin either disable SSL interception on the Proxy, or manually import the certification sent from the Proxy.
How to Manually Import Certification every bit a TrustPoint:
Note, the document will need exist in a BASE64 format to be copied and pasted onto the device as a TrustPoint.The following example shown below uses "LicRoot" as the TrustPoint name, however, this name can exist inverse as desired.
Device#conf t
Device(config)#crypto pki trustpoint LicRoot
Device(ca-trustpoint)#enrollment terminal
Device(ca-trustpoint)#revocation-cheque none
Device(ca-trustpoint)#leave
Device(config)#crypto pki authenticate LicRoot
Enter the base of operations 64 encoded CA certificate.
End with a blank line or the word "quit" on a line by itself
-----Begin Document-----
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
-----END CERTIFICATE-----
Document has the following attributes:
Fingerprint MD5: XXXXXXXX
Fingerprint SHA1: XXXXXXX
% Do y'all accept this document? [yes/no]: yes
Trustpoint CA document accepted.
% Document successfully imported
- When using the Send Gateway HTTP Proxy the IP address needs to be changed from tools.cisco.com to the Proxy like the following:
destination accost http https://tools.cisco.com/its/service/oddce/services/DDCEService
TO
destination address http https://<TransportGW-IP_Address>:<port_number>/TransportGateway/services/DeviceRequestHandler - The Transport Gateway IP address can found past navigating to the HTTP Settings and looking nether the HTTP Service URLs on the Cisco Transport Gateway GUI.
When migrating a Cisco device to a Smart Licensing enabled software version the following flowchart can be used as a general guide for all three methods (Direct Cloud Access, HTTPS Proxy, and Cisco Smart Software Manager satellite).
Device Upgraded or Shipped with software release that supports Smart Licensing (refer to department 1.3 for list of supported IOS-XE releases).
Beneath troubleshooting steps mainly concentrate on a scenario in which 'device fails to register'.
four.1. Device Fails to register
After initial configuration, in club to enable Smart Licensing, Token, which is generated on CSSM / Cisco Smart Software Managing director satellite, needs to exist registered on the device via CLI:
license smart annals idtoken <TOKEN>
This should generate the following events:
!
! Smart licensing process starts
!
Registration process is in progress. Use the 'show license condition' command to check the progress and result !
! Crypto key is automatically generated for HTTPS communication
!
Generating 2048 bit RSA keys, keys will be exportable... [OK] (elapsed time was 1 seconds) %CRYPTO_ENGINE-5-KEY_ADDITION: A key named SLA-KeyPair has been generated or imported by crypto-engine %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Event "write memory" to salve new IOS PKI configuration !
! Call-home showtime registration process
! %CALL_HOME-6-SCH_REGISTRATION_IN_PROGRESS: SCH device registration is in progress. Call-home will poll SCH server for registration result. You can also check SCH registration status with "call-dwelling house request registration-info" under EXEC mode. !
! Smart Licensing process connects with CSSM and check entitlement.
! %SMART_LIC-6-EXPORT_CONTROLLED: Usage of consign controlled features is allowed %SMART_LIC-6-AGENT_REG_SUCCESS: Smart Agent for Licensing Registration with the Cisco Smart Software Manager or satellitefor udi PID:<PID>,SN:<SN> %SMART_LIC-4-CONFIG_NOT_SAVED: Smart Licensing configuration has not been saved %SMART_LIC-v-IN_COMPLIANCE: All entitlements and licenses in utilise on this device are authorized %SMART_LIC-6-AUTH_RENEW_SUCCESS: Authorization renewal with the Cisco Smart Software Manager or satellite. State=authorized for udi PID:<PID>,SN:<SN>
To check call-abode configuration, run the following CLI:
#show call-home profile all Profile Name: CiscoTAC-1 Profile status: Active Profile manner: Full Reporting Reporting Data: Smart Call Home, Smart Licensing Preferred Message Format: xml Message Size Limit: 3145728 Bytes Transport Method: http HTTP address(es): https://tools.cisco.com/its/service/oddce/services/DDCEService Other address(es): default Periodic configuration info message is scheduled every 1 solar day of the calendar month at 09:fifteen Periodic inventory info bulletin is scheduled every one day of the month at 09:00 Alarm-group Severity ------------------------ ------------ crash debug diagnostic minor environment alert inventory normal Syslog-Pattern Severity ------------------------ ------------ APF-.-WLC_.* warning .* major
To check Smart Licensing status, run the following CLI:
#evidence license summary Smart Licensing is ENABLED Registration: Status: REGISTERED Smart Business relationship: TAC Cisco Systems, Inc. Virtual Business relationship: Krakow LAN-SW Consign-Controlled Functionality: ALLOWED Terminal Renewal Attempt: None Adjacent Renewal Attempt: Nov 22 21:24:32 2019 UTC License Dominance: Status: AUTHORIZED Terminal Advice Endeavour: SUCCEEDED Side by side Communication Attempt: Jun 25 21:24:37 2019 UTC License Usage: License Entitlement tag Count Status ----------------------------------------------------------------------------- C9500 Network Advantage (C9500 Network Advantage) 1 AUTHORIZED C9500-DNA-40X-A (C9500-40X Dna Advantage) i AUTHORIZED
In case device fail to annals (and Status is different from REGISTERED as shown above; notation that Out-of-Compliance points to an issue on CSSM similar missing license in Smart Virtual Account, wrong mapping (i.e. Token from different virtual account was used where licenses are not available, etc.) bank check the following:
1. Verify configuration settings and common failure scenarios
Refer to section two.1 for basic configuration steps. Look also at section 5 for mutual failure scenarios observed in the field.
2. Bank check basic connectivity
Verify that device can achieve (and open TCP port) to tools.cisco.com (in case of direct admission) or to Cisco Smart Software Director satellite:
#evidence run all | in destination address http destination accost http https://tools.cisco.com/its/service/oddce/services/DDCEService ! ! check connectivity ! #telnet tools.cisco.com 443 /source-interface gi0/0 Trying tools.cisco.com (173.37.145.8, 443)... Open up [Connection to tools.cisco.com closed by strange host]
In case above does not work, double-bank check your routing rules, source-interface and firewall settings.
Annotation that HTTP (TCP/lxxx) is being deprecated and the recommended protocol is HTTPS (TCP/443).
Refer to section: "iii. Considerations and Caveats" in this document for farther guidelines how to configure DNS and HTTP details.
3. Verify Smart License settings
Collect the output of:
#show tech-support license
and validate collected configuration / logs (attach this output in case you decide to open Cisco TAC case for further investigation).
4. Enable debugs
Enable the following debugs to collect boosted information well-nigh Smart Licensing procedure (note that subsequently enabing debugs, you need to effort to register license one time again via CLi mentioned in point four.i):
#debug call-habitation smart-licensing [all | trace | error] #debug ip http client [all | api | cache | fault | chief | msg | socket]
For internal debugs, enable and read binary traces:
! enable debug #set up platform software trace ios [switch] active R0 infra-sl debug ! ! read binary traces infra-sl procedure logs #testify platform software trace bulletin ios [switch] active R0
The post-obit are some common failure scenarios that could exist experienced during or after a Cisco device registration:
Scenario #1: Switch Registration "Failure Reason: Production Already Registered"
Snip of "evidence license all":
Registration:
Condition:UNREGISTERED – REGISTRATION FAILED
Export-Controlled Functionality: NotAllowed
Initial Registration: FAILED on Oct 22 14:25:31 2018 EST
Failure reason:Product Already Registered
Adjacent Registration Attempt: Oct 22 xiv:45:34 2018 EST
Next Steps:
– The Cisco device will demand to be registered over again.
– If the Cisco device is seen in the Cisco Smart Software Managing director (CSSM), the "force" parameter volition need to be used (i.e. "license smart register idtoken <TOKEN> force")
NOTE:The failure reason can likewise show every bit the following:
– Failure reason: The product <10> and sudi containing udiSerialNumber:<SerialNumber>,udiPid:<Production> has already been registered.
– Failure reason: Existing Product Instance has Consumption and Force Flag is False
Scenario #2: Switch Registration "Failure Reason: Your request could not be processed right at present. Please try once more"
Snip of "show license all":
Registration:
Condition: REGISTERING – REGISTRATION IN PROGRESS
Export-Controlled Functionality: NotAllowed
Initial Registration: FAILED on October 24 15:55:26 2018 EST
Failure reason:Your request could not be processed right now. Please try again
Next Registration Endeavour: Oct 24 16:12:15 2018 EST
Adjacent Steps:
– Enable debugs equally mentioned in section 4 to become more insights on the upshot,
– Generate new Token in CSSM in your Smart Licensing and accept an some other endeavor.
Scenario #iii: Failure Reason "The device date 1526135268653 is offset beyond the allowed tolerance limit
Snip of "show license all":
Registration:
Status: REGISTERING – REGISTRATION IN PROGRESS
Export-Controlled Functionality: NotAllowed
Initial Registration: FAILED on Nov 1117:55:46 2018 EST
Failure reason:{"timestamp":["The device date '1526135268653' is offset across the immune tolerance limit."]}
Next Registration Attempt: Nov eleven eighteen:12:17 2018 EST
Possible Logs Seen:
%PKI-three-CERTIFICATE_INVALID_NOT_YET_VALID: Certificate chain validation has failed. The certificate (SN: XXXXXX) is not however valid. Validity flow starts on 2018-12-12:43Z
Next Steps:
– Verify that the Cisco device clock is showing the right time (show clock)
– Configure the Network Time Protocol (NTP) if possible to ensure the clock is set correctly
– If NTP is non possible, verify that the manually set clock (clock set up) is correct (show clock) and configured equally a trusted time source by verifying that "clock calendar-valid" is configured
NOTE– By default, the system clock is not trusted. "clock calendar-valid" is required.
Scenario #4: Switch Registration "Failure Reason: Communication ship not available."
Snip of "show license all":
Registration: Condition: UNREGISTERED – REGISTRATION FAILED
Export-Controlled Functionality: Not Allowed
Initial Registration: FAILED on Mar 09 21:42:02 2019 CST
Failure reason:Advice transport non available.
Possible Logs Seen:
%CALL_HOME-3-CALL_HOME_FAILED_TO_ENABLE: Failed to enable call-dwelling house from Smart Agent for Licensing: The command failed to enable smart phone call habitation due to an existing active user contour. If you lot are using a user profile other than "CiscoTAC-1" contour to transport data to SCH server in Cisco, please enter "reporting smart-licensing-data" under profile mode to configure that profile for smart licensing. For more details well-nigh SCH, please check http://www.cisco.com/go/smartcallhome
%SMART_LIC-3-AGENT_REG_FAILED: Smart Agent for Licensing Registration with the Cisco Smart Software Manager or satellite failed: Communication transport non available.
%SMART_LIC-three-COMM_FAILED: Communications failure with the Cisco Smart Software Manager or satellite: Advice transport not bachelor.
Next Steps:
– Verify that call-home is enabled with "service call-dwelling" in the "show running-config" output of the Cisco device
– Ensure that the right call-habitation profile is active
– Verify that "reporting smart-licensing-data" is configured under the active telephone call-home profile
Scenario #5: Switch License Authorisation "Failure reason: Neglect to send out Call Home HTTP bulletin."
Snip of "testify license all":
License Authorization:
Status: OUT OF COMPLIANCE on Jul 26 09:24:09 2018 UTC
Last Communication Endeavour: FAILED on Aug 02 14:26:23 2018 UTC
Failure reason:Fail to send out Call Dwelling HTTP bulletin.
Next Communication Endeavor: Aug 02 fourteen:26:53 2018 UTC
Communication Deadline: Oct 25 09:21:38 2018 UTC
Possible logs are seen:
%SMART_LIC-three-COMM_FAILED:Communications failure with the Cisco Smart Software Director or satellite: Fail to transport out Phone call Dwelling HTTP bulletin.
%SMART_LIC-3-AUTH_RENEW_FAILED:Authorization renewal with the Cisco Smart Software Manager or satellite: Communication bulletin send error for udi PID:Xxx, SN: 30
Side by side Steps:
– Verify that the Cisco device can pingtools.cisco.comor the nslookup translated IP
– Try to telnet from the Cisco device to tools.cisco.com on TCP port 443 (port used past HTTPS)
– Verify that the HTTPs client source interface is correct
– Verify that the URL/IP in the phone call home contour is set correctly on the Cisco device via"show call-home contour all"
– Verify the ip route is pointing to the right next hop
– EnsureTCP port 443is not existence blocked on the Cisco device, the path to Smart Call Home Server, or the Cisco Smart Software Managing director satellite
– Ensure that the correct Virtual Routing and Forwarding (VRF) instance is configured if applicable
Scenario #6: Switch License Dominance "Failure reason: Waiting for answer"
Snip of "show license all":
License Authorization:
Status: OUT OF COMPLIANCE on Jul 26 09:24:09 2018 UTC
Last Advice Attempt: Awaiting on Aug 02 fourteen:34:51 2018 UTC
Failure reason: Waiting for reply
Next Advice Attempt: Aug 02 14:53:58 2018 UTC
Communication Borderline: October 25 09:21:39 2018 UTC
Possible logs are seen:
%PKI-3-CRL_FETCH_FAIL: CRL fetch for trustpoint SLA-TrustPoint failed Reason : Failed to select socket. Timeout : 5 (Connection timed out)
%PKI-3-CRL_FETCH_FAIL: CRL fetch for trustpoint SLA-TrustPoint failed Reason : Failed to select socket. Timeout : 5 (Connection timed out)
Next Steps:
– To correct this event the SLA-TrustPoint should be configured every bitnone under the running configuration
show running-config
<omitted>
crypto pki trustpoint SLA-TrustPoint
revocation-checknone
What is a CRL?
A Document Revocation List (CRL) is a listing of revoked certificates. The CRL is created and digitally signed by the certificate authorisation (CA) that originally issued the certificates. The CRL contains dates for when each certificate was issued and when information technology expires. Further data in regards to CRL is available here.
Scenario #7: License in "OUT OF COMPLIANCE" status
Snip of "show license all":
License Authorization:
Condition: OUT OF COMPLIANCE on Jul 26 09:24:09 2018 UTC
Last Communication Endeavor: Pending on Aug 02 14:34:51 2018 UTC
Failure reason: Waiting for answer
Next Communication Endeavor: Aug 02 fourteen:53:58 2018 UTC
Communication Deadline: Oct 25 09:21:39 2018 UTC
Possible logs are seen:
%SMART_LIC-iii-OUT_OF_COMPLIANCE: One or more entitlements are out of compliance
Side by side Steps:
– Verify if Token from proper Smart Virtual Business relationship has been used,
– Verify corporeality of bachelor licenses hither.
Source: https://blog.octanetworks.com/cisco-smart-licensing-troubleshooting-steps-and-considerations-on-catalyst-platforms/
Posted by: mierascumbrues.blogspot.com
0 Response to "What Is A Registered Agent For State Charity Registrations"
Post a Comment